| |
H.M.S. Communications, Inc.
ICOM IC-F320 VHF/IC-F420 UHF
MOBILE TRANSCEIVERS*
SPECIFICATIONS
ADDITIONAL FEATURES
- Backlit keys help night operation
- 32 channels for 5-tone encoder (optional)
- Emergency call with single and repeat function
- 8 identities + group code for 5-tone decode (optional)
- Selectable digits for 5-tone decode indication
- Automatic ID transmission linked to PTT
- 51 frequencies for CTCSS (plus 1 programmable)
- Polarity selectable for DTCS
- 7 autodialing memories for DTMF
- Up to 5 character channel display
- Bank separation capability
- 5 scan channel groups
- 2 priority channels
- Automatic scan start and/or receive mute when mic. is on hook
- Automatic priority channel selection and/or mute release when mic. is off
hook
- Normal and priority scan
- Scan start at power on
- CTCSS reverse burst
- Remote monitoring capability (optional UT-96 required)
- Optional PIN code input to prevent operation by unauthorized persons
- Programmable minimum level for audio output
- Talk around function (temporary simplex operation on a duplex channel)
- Time-out transmission timer
- Penalty timer
- Busy channel lockout options
- 2 selectable 'stun' functions (optional UT-96 required)
- Compact body provides easy installation
- Advanced programming for IBM® compatible PC's
SPECIFICATIONS
GENERAL
- Frequency Coverage:
- IC-F320 -- 136-155 MHz, 146-174 MHz
- IC-F420 -- 400-430 MHz, 450-470 MHz OR 470-490 MHz, 490-512 MHz
- Number of channels: 32 (16 ch x 2 banks)
- Type of emission:
- 8K0F3E (12.5 kHz/15 kHz: narrow)
- 16K0F3E (25 kHz/30 kHz: wide)
- Frequency stability: ±0.00005% (5ppm)
- Operating Temperature Range: -30°C to +60°C; -22°F to +140°F
- Power Supply Requirement: 13.6 V DC ±15% (negative ground)
- Current drain (approx.):
- Transmit
- at 45 W:10 A (IC-F320)
- at 35 W: 8 A (IC-F420)
- Receive
- Max. audio: 700 mA
- Standby: 200 mA
- Antenna connector: SO-239 (50 )
- Dimensions: 5-1/2(W) x 1-19/32(H) x 6-11/16(D) in
- Weight: 2 lb 10 oz
TRANSMITTER
- Output power:
- 45 W (IC-F320)
- 35 W (IC-F420)
- Modulation system: Variable reactance freq. mod.
- Max. frequency deviaton: ±5.0 kHz, ±2.5 kHz narrow
- Spurious emissions: 70 d
- Adjacent ch. power: 70 dB (wide), 60 dB (narrow)
- Mic. connector: 8-pin modular (600 )
RECEIVER
- Sensitivity (at 12 dB SINAD):
- 0.22 µV typical for IC-F320
- 0.25 µV typical for IC-F420
- Squelch sensitivity:
- 0.22 µV typical for IC-F320
- 0.25 µV typical for IC-F420
- Adjacent channel selectivity: 70 dB (wide), 60 dB (narrow)
- Spurious response: 70 dB
- Intermodulation: 65 dB
- Audio output power: 3 W typical at 5% distortion with a 4
load.
- Ext.SP connector: 2-conductor 3.5 (d) mm (1/8")/4
Measurements made in accordance with EIA/TIA-204D, EIA/TIA-152C. All stated
specifications are subject to change without notice or obligation.
SUPPLIED ACCESSORIES
- Hand mic.
- DC power cable
- Fuses
- Mounting bracket kit
- Key assign stickers
OPTIONS
- UT-96 5-TONE UNIT: Provides 2-tone and 5-tone decoder capabilities
- UT-105 SmarTrunk II TM Logic Board. Provides
SmarTrunk II capabilities.
- SP-5 EXTERNAL SPEAKER: Large speaker for excellent audio quality.
Input impedance: 4 . Max. input power: 5 W
- SP-10 EXTERNAL SPEAKER: Compact and easy-to-install. Input
impedance: 4 . Max. input power: 5 W
The ICOM logo is a registered trademark of
ICOM, Inc. All ICOM radios significantly exceed FCC regulations limiting
spurious emissions. All stated specifications are subject to change without
notice or obligation. |