IC-R2 Specifications
Home Up Feedback Search Contents Contact Us

 

Home
Up

H.M.S. Communications, Inc.

IC-R2


SPECIFICATIONS

GENERAL

  • Frequency Range (USA):
    • 0.495-823.995 MHz
    • 849.0-868.995 MHz
    • 894.0-1300.995 MHz
  • Frequency Range (Canada, most other countries):
    • 0.495-1300.995 MHz
  • Mode: FM, WFM AM
  • Tuning Steps: 5, 6.25, 9, 10, 12.5, 15, 20, 25, 30, 50, 100 kHz
  • Number of Memory Channels: 450 (400 regular, 50 scan edges)
  • Usable Temperature Range: -10C to +50C; +14F to +122F
  • Current Drain (at 3.0 V DC):
    • Rated Audio: 170 mA typ.
    • Standby: 100 mA typ.
    • Power Saved: 41 mA typ.
  • Power Supply Requirement: 2 x AA (R6) Ni-Cd or alkaline cells
  • Antenna Connector: SMA (50 )
  • Dimensions: 58(W) x 86(H) x 27(D) mm, 2.3(W) x 3.4(H) x 1.1(D) in (projections not included)
  • Weight: 170 kg; 6 oz.

Receiver

  • Receive System: Triple conversion superheterodyne
  • Intermediate Freq.
    1st: 266.7 MHz
    2nd: 19.65 MHz
    3rd: 450 kHz
  • Sensitivity (except spurious points; typical):
    • FM (at 12 dB SINAD)
      • 1.625 - 5.0 MHz, 0.4 V
      • 5.005 - 29.995 MHz, 0.25 V
      • 30 - 117.995 MHz, 0.2 V
      • 118 - 174.995 MHz, 0.18 V
      • 175 - 329.995 MHz, 0.22 V
      • 330 - 429.995 MHz, 0.25 V
      • 430 - 450 MHz, 0.22 V
      • 450.005 - 469.995 MHz, 0.25 V
      • 470 - 999.995 MHz, 0.28 V
      • 1000+ MHz, 0.45 V
    • WFM (at 12 dB SINAD):
      • 76 - 108 MHz, 0.71 V
      • 175 - 221.995 MHz, 0.71 V
      • 470 - 770 MHz, 1.0 V
    • AM (at 12 dB SINAD):
      • 0.495 - 5 MHz, 1.3 V
      • 5.005 - 30 MHz, 0.79 V
      • 118 - 136 MHz, 0.63 V
      • 222 - 246.995 MHz, 0.63 V
      • 247 - 329.995 MHz, 0.71 V
  • Selectivity
    • AM, FM: More than 15 kHz/6 dB, Less than 30 kHz/60 dB
    • WFM: More than 150 kHz/8 dB
  • Audio Output Power: 100 mW typical, at 10% distortion with an 8 load.
  • External Speaker Connector: 3-conductor 3.5(d) mm (1/8")/8

SUPPLIED ACCESSORIES

  • 2 - Rechargeable AA Ni-Cd Cells and Charger
  • Antenna
  • Handstrap
  • Belt Clip

OPTIONS

  • CS-R2 CLONING SOFTWARE + OPC-478 CLONING CABLE: Provides quick and easy programming of memory channels, memory names and set mode contents via an IBM compatible PC.
  • OPC-474 CLONING CABLE: Allows you to transfer data between receivers.
  • LC-146 CARRYING CASE
  • HP-4 HEADPHONE/SP-13 EARPHONE: Provide clear audio in noisy environments
  • AD-925MA ANTENNA CONNECTOR ADAPTER: Allows you to connect a BNC type antenna
  • BC-127A/D Ni-Cd CHARGER: Same as supplied. Up to 4 Ni-Cd cells can be charged simultaneously

The ICOM logo is a registered trademark of ICOM, Inc. All ICOM radios significantly exceed FCC regulations limiting spurious emissions. All stated specifications are subject to change without notice or obligation.

Get Microsoft Internet ExplorerGet Netscape Navigator

Hit Counter

Home ] Up ]

Send mail to don20061@donegal-holdings.com with questions or comments about this web site.
Copyright 1999 Donegal Holdings Ltd., Inc.
Last modified: May 15, 2006